Stirling Broadcast SB-88 Domestic Monitor Loudspeaker

Stirling Broadcast SB-88 Domestic Monitor Loudspeaker.

Stirling Broadcast is proud to present another outstanding loudspeaker design by Derek Hughes. This new loudspeaker is a two-way design, being similar to the Stirling Broadcast LS3/6 but with a slightly smaller cabinet and without the 'super-tweeter'. The LF and HF units are the same custom units as used in the Stirling Broadcast LS3/6.

The loudspeaker has an IEC268 power handling of 90 watts contnuous and a frequency response of 48Hz - 18kHz +/-3dB, with a crossover point of 3kHz. The sensitivity is 87db for 1 watt at 1 metre, and the maximum output is 107dB.

The loudspeaker utilises a 22cm LF drive unit SB-4432 and a 27mm HF unit SB-4434, and the nominal impedance is 8ohms. The connections are by bi-wired screw terminals accepting both 4mm plugs and bare wires up to 4mm cross sectional area.

The cabinet is 27cm wide, 30cm deep and 50cm high and of a thin wall damped construction with internal standing wave damping, finished in pair matched wood veneer with a matt lacquer finish. The weight is 14.4kg.

• Type: Two way stand-mounted loudspeaker, classic thin-wall (9mm) birch plywood construction, internally damped panels.
• Connections: High quality gold plated bi-wire terminals
• Driver complement: Stirling specification 200mm bass/mid driver, 26mm tweeter
• Crossover frequency: 3 kHz
• Power Handling: 90w continuous,150w short term
• Max Sound Level: 107dB, pair @2m
• Sensitivity: 87dB/1watt/1m
• Frequency Response: 48Hz to 18kHz +/-3dB(On HF axis @1m)
• Impedance: 8 ohms nominal
• Cabinet Dimensions: 27cm (12") wide x 30cm (12") deep x 50cm (24") high
• Weight: 14.4kg each (shipping weight 22kg each)

The following Editions/Veneers are available:

Cherry

Walnut

Black Ash

Ebony "Limited Edition Gold Label"

Rosewood "Limited Edition Gold Label"